Origin

China

The glass covering permits up to 90% of the visible sunlight to enter the collector. When the light passes through the glass its frequency is changed slightly to a lower energy level. When the light strikes the absorbing surface of the flat plate inside, the light is absorbed as heat. The combination of the glass frequency change and the solar absorbing surface of the plate capture the maximum amount of energy. As the absorber plate heats up it begins to radiate energy as infrared (IR) or heat radiation. Glass is essentially opaque to IR wavelengths so the heat is trapped increasing the temperature.

Key features: 

1 Use most advanced absorptive coating and high quality copper material guaranty high heat absorption and transformation efficiency,absorptance>93%, Emittance <8%;

2 Specific technology and complete sealing design,maximum heat can be stored into the water box;

3 Thick glass wool insulation can guaranty maximum thermal reservation;

4 Anti-freezing,so it can also be used in high-latitude area;

5 Handpicked strong intensity cover glass,can resist 25mm diameter hail attack;

6 Handsome appearance,be integrated with the architecture with no clash with the building appearance;

7 Easy installation,can be installed on the roof with any slope, on the balcony or hung on the wall;

8 The special heat conductive media is heated in copper tube,reliable quality,and avoid maintenance for the long span of 15 years.

Specifications:

Absorber coating: Aluminum-copper complex Ultrasonic welding selective oxidation

Size(mm)out line: L2000 x W1000 x H96mm

Collector area: 2.00m²
Copper-aluminum alloy tubes: Ø10mm x0.45mm x 1886mm

Absorber fin: 140 x 0.35mm x 1845mm  Aluminum absorber fin 10pcs

Copper header: Ø22 x 0.6mm x 1060mm

Aluminum copper Absorber Fin: 8pcs

Surface coating: Black chrome coating

Insulation material: 50mm 32k fiber glass layer

Frame: Anodized aluminum frame in brown  2000mm x 1000mm x 96mm

Glass cover: 4mm pattern tempered glass   

Sealing profile: EPDM

Leak-proof protection: EPDM

Backing sheet: 0.4mm galvanized steel plate

Operation pressure: 4bar

Test pressure: 8bar