Origin

China

The split solar water heater is an active system, because it uses a pump with a controller to circulate the fluid in the system. When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically, the heat-conducting liquid transfers heat to water by heat exchanger in the water tank.

Key features:

1 The collector and the water tank are separated,the water tank can be installed anywhere, and the system runs under the forced pressure;

2 Pressurized design,with strong hydraulic pressure you can have hot water when you turn on your cock,the water rush out with strong hydraulic pressure make your bathe more comfortable;

3 Porcelain enamel inner tank with copper coil inside,anti-freeze fluid do heat;

4 Module design,arbitrary combination,which can meet the demand of large water consumption;

5 Intelligent control and automatic operation.

Specifications:

1 Evacuated tube size: Φ47x1500mm  Φ58x1800mm

2 Evacuated tube materials: High borosilicate 3.3 glass with copper pipe

3 Evacuated tube counts: Φ47x 1,500mm: 12 tubes/set, 24 tubes/set

                                      Φ58 x1,800mm: 15 tubes/set, 20 tubes/set ,30 tubes/set

4 Inner tank: Porcelain enamel

5 Outer tank: Color coating steel

6 Manifold: SUS304-2B food grade stainless steel

7 Insulation:manifold:rock wool or polyurethane

                 water tank:Insulating layer is high dense polyurethane foam, thickness: 55mm

8 Tank capacity:150L, 200L, 250L, 300L

9 Absorption area:1.92-7.7 m2

10 Pressure: 0.6 MPa